How to Load a Non-Running Car on a Tow Dolly?

How to Load a Non-Running Car on a Tow Dolly?

Ever felt perplexed when your automobile abruptly stopped driving in the center of the highway? Because they squander so much of your precious and sometimes even money, these types of scenarios always leave you feeling annoyed for the entire day. Consider using a tow dolly if your non-running vehicle becomes stopped next to a road bend. It is often simple to deploy when you drive your automobile near a tow dolly. However, it is not equally practical for a non-running vehicle. On the contrary, you must have firsthand knowledge to move your non-running vehicle onto the top of it. This guide will explain how to load a non-running car on a tow dolly.

Read more about putting a non-running automobile onto a dolly.

A tow dolly is an item of portable equipment that makes parking or moving your automobile easier. Its user-friendly utility is the reason it is so well-liked. The resting position of the rear wheels is its finest feature. On the contrary hand, the remaining wheel on the back would enable the vehicle to continue to its intended location.

Therefore, it is evident that you are already aware of how a tow dolly gets employed for a car retrieval job. Due to its design concept and adjustment, you could effortlessly board your car without attaching the two anchors. On the other hand, compared to any flatbed carrier, it guarantees quicker contingents. The reason, lifting and unloading a vehicle both go smoothly. So let’s look at how to load a non-running car on a tow dolly.

How to Load a Non-Running Car on a Tow Dolly? – All You Need to Know

Cars’ Model and Weight

Your ability to put your automobile onto a dolly depends on several factors, including the type of the car. Since it doesn’t need any particular loading techniques, the automobile tow dolly is best suited for front-wheel drive cars. A bulkier tow automobile is better for towing than the automobile it pulls. Experts advise making it at least 750 lbs heavier since doing so without safety gear is risky for anybody engaged in the procedure.

Types of Dolly

There are two kinds of automobile dollies. They have nicely mounted front-wheel sliders and centrally pivoted dollies, which is relatively standard. The attached front-wheel-drive dolly performs virtually identically to your vehicle’s main wheels. This sort is preferable to use, particularly for novices, since it reduces the risks of your tow truck colliding with your car.

The centrally pivoted one, on the contrary hand, is relatively similar. However, the pivot location might cause your vehicle-in-tow to swing about while you perform bends. Additionally, multiple vehicle types necessitate various dollies. Therefore, you are responsible for selecting the design that best fits your car.


While using a tow dolly may initially provide some challenges, you’ll find it simple once you get the hang of it. A tow dolly is required to transfer the automobile; thus, carrying one with you is crucial. But, you must be familiar with the procedure to load a non-driving automobile onto the towing dolly. Otherwise, you’ll have to pay a lot of money to hire a professional to move your car to the proper spot for retrieval. You can pack your automobile in approximately 5 to 10 mins if you follow these instructions. We will now outline some critical actions for you to take.

  • Finding a flat, sturdy area on which to park your vehicle and towing dolly is essential. Next, ensure the security chains and connectors are fastened to your car and don’t contact the ground.
  • You may start setting up the dolly by extending the ramps on both ends. Then pull up to release the tire buckles, lay them flat on the ground of the dolly, and position your vehicle to align with the dolly.
  • It’s time to load the car onto the towing dolly now. You now need to insert it correctly so that loading may begin. Before gently driving up the ramps, ensure that nothing is blocking the path between the car and the dolly. Do this repeatedly till your automobile crosses the barrier at the automobile dolly’s frontal end.
  • Double-check if your car is in the middle or on the incorrect side. If that’s the scenario, move your vehicle and fasten your seatbelt to lock the movement.
  • An automobile that is not in motion can get moved in several ways. You could use two greased metal plates to lift and transport goods. You won’t have to pay more money by employing the metal plate, which is a benefit. So, pick the approach that works ideal for you and your car.
  • Place the straps over the vehicle’s wheel to securely attach it. The ratchet may be aligned once you have ensured they keep balancing in the middle. After the tire is suitable, you must adjust the ratchet as far as possible before folding the dolly ratchet. S hooks are another option for ensuring the security procedure.
  • Lifting and sliding the ramps straight into the car is required. Ensure your vehicle is in parking mode, let off the brake, and disengage the steering wheel.
  • Turn your vehicle sideways and gradually drive in various orientations. Retighten any loose items. Check again after traveling 5 miles in the initial period and 50 miles the subsequent time to ensure nothing has changed.

To reduce the likelihood of errors, ensure everything is ready before loading.

Bottom Line

We hope you now understand the value of a vehicle dolly to handle unforeseen circumstances after reading this article on how to load a non-running car on a tow dolly. Vehicle dollies come in various styles and price ranges, so you may pick the one that best fits your vehicle and budget. Don’t delay getting one; you won’t be sorry about it, and purchasing one benefits your acquaintances, family, and others in your immediate vicinity.

More Like This: Check Out These Related Articles

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *