does my car have remote start by vin number
|

How to Check for Remote Start by VIN ? No More Guessing

You cannot determine whether you have a remote start by looking at your VIN. In addition to describing a VIN’s essential characteristics, this article also defines what it is. In this article, we will talk does my car have remote start by Vin number

What is a VIN Number?

A 17-digit code of capital letters and digits known as a vehicle identification number (VIN) is used to identify each car in the world. Your car’s brand, model, year, engine size, and manufacturer are all indicated by a certain letter or number that appears on it.

Does my car have remote start by vin number

To determine if your car has remote start capability based on its VIN number, you can follow the steps mentioned in the earlier response:

  1. Look for a Key Fob: Check if your car comes with a key fob that has a remote start button.
  2. Check the Owner’s Manual: Refer to your car’s owner’s manual to see if it mentions remote start as a feature.
  3. Consult a Car Dealer: If you’re still unsure, visit a car dealer who can check if your vehicle has remote start or if it can be activated.
  4. Use a VIN Decoder Tool: You can use an online VIN decoder tool to get detailed information about your car based on its VIN number. Some tools might provide information about remote start compatibility, but this information might not always be available.

Remember that not all vehicles come with remote start capability, and it may also depend on the specific trim level or optional packages that were chosen when the vehicle was purchased. If your car doesn’t have remote start, aftermarket remote start systems are available for installation. However, it’s essential to ensure that any modifications or installations are done correctly to avoid potential issues or voiding warranties.

Will my vin number tell me if i have remote start

In most cases, the VIN number alone will not explicitly tell you whether your car has remote start capability. The VIN (Vehicle Identification Number) is a unique 17-digit code used to identify a specific vehicle and provides essential information about the car’s make, model, year, engine type, and other specifications.

While the VIN can offer valuable information about the vehicle, it usually does not include specific details about optional features, such as remote start, that may have been installed on the car.

To determine if your car has remote start capability, you can follow these steps:

  1. Look for a Key Fob: Check if your car’s key fob has a remote start button. A key fob with a remote start button is an indication that your vehicle supports remote start.
  2. Check the Owner’s Manual: Review your car’s owner’s manual, which often includes information about the vehicle’s features, including whether it has remote start.
  3. Contact the Car Manufacturer: You can reach out to the car manufacturer’s customer support or visit their official website to check if your car model and trim come with remote start as a standard or optional feature.
  4. Consult a Car Dealer: If you are unsure about the remote start capability of your car, you can visit a car dealership for assistance. They can help determine if your vehicle has remote start or can activate it for you if it is compatible.
  5. Use a VIN Decoder Tool: Some VIN decoder tools available online might provide additional information about a car’s features, but remote start information is not always guaranteed to be included.

Remember that not all vehicles come with remote start, and it may be available as an optional feature or limited to specific trim levels. If your car doesn’t have remote start and you wish to have it, you can explore aftermarket options or consult with a professional car electronics installer.

Can you Determine Remote Start Capability by VIN Numbers?

A fantastic feature to have in a car is remote starting. It can save your life on chilly days and let you start your automobile from a distance. There are a few ways to determine whether your automobile has this feature because not all vehicles have it.

Search for a key fob to see if your car has a remote start. A key fob may be included if your automobile supports remote starting. Your automobile can be started by pressing a button on the key fob.

Checking your car’s owner’s manual is another way to determine whether it supports remote start. The car’s features are included in the owner’s manual, stating whether the vehicle has a remote start.

 A car dealer is always a good place to start if you’re unsure if your vehicle has remote starting. If a car doesn’t already have a remote start, car dealers can activate it for you. They can also tell you if a car has a remote starting.

How to Decode your VIN Number for Remote Start Information?

Your vehicle’s compatibility with remote start systems is one of the many details about your car that may be learned by decoding the VIN number. However, the specific data contained in your VIN number will vary depending on the make and model of your car.

You may use a VIN decoder tool online to decode your VIN and find out if your car is remote start compatible. These resources can be obtained from several places, such as automakers, automobile websites, and outside service suppliers.

Your vehicle’s 17-digit VIN will normally need to be entered using a VIN decoder tool. You will then receive a comprehensive report from the tool that contains details on the vehicle’s make and model, engine type, gearbox type, and other features. Depending on the tool you employ, the report may also provide details regarding the vehicle’s compatibility with remote start systems and other aftermarket modifications and add-ons.

How to decode your VIN number for remote start information?

How to Install Remote Start on a Vehicle Without Factory Remote Start?

  1. Please ensure the item you have received is the kit you ordered, and make sure it is appropriate for your specific vehicle.
  2. Read the instruction handbook that came with your remote starter kit from cover to cover.
  3. With a wiring diagram for a particular car or model, you will now search for all the wires indicated in your kit’s instructions.
  4. Before turning a single wrench or making any cuts, make sure you know the color codes of all the wires that will be tapped into.
  5. Verify that every ignition-based circuit your remote starter kit will use is working.
  6. When installed, it is unlikely that your remote start system will work if any of these features are not functional.
  7. Make a placement decision for your remote starter module. The lower dash of your car, directly below the steering wheel, is the most typical place for this.
  8. Examine the connection between the lower dash panel and the other dash components. Put this paneling to the side after removing it with the required tools.
  9. Disconnect your car battery cables at their terminals before making any initial cuts to avoid unintentional current arcing, which is a simple way to wreak havoc on your car’s electronics.
  10. Examine the lower dash area after a strong grasp of the wiring used during installation.
  11. Locate these cables and mark them if it will help. The precise number of wires this will apply to varies from one kit to the next.
  12. To gain unlimited access to their area, remove any additional paneling that may be needed. It would help if you remembered that enough room must be gained to create all wiring connectors and solder for connectivity.
  13. Make sure that all of the cables are attached to your remote starter module properly. Ineffective connections can cause several problems and are difficult to track.
  14. The unit’s wiring will now be connected to your car. Start by connecting the unit ground wire to a suitable chassis ground in the kick panel or under the dash area.
  15. Find the wire designated by your wiring diagram and kit instructions as a constant 12v source.
  16. Using a test light or multimeter will enable you to confirm this. When the ignition is off, this wire should show battery voltage or illuminate a test light when probed.
  17. To attach the relevant wire from your remote starter kit, you can now strip this wire as necessary. Solder the wire junction firmly into place to complete this connection.
  18. The 12v switched accessory power line should be found in the lower dash area of your car. A test light or multimeter can be used to confirm the identity of this wire.
  19. Your test light should come on when the key is turned to the “On” position, or you should be able to see the battery voltage on your multimeter.
  20. Locate the ignition wire coming from the ignition switch in your car. Once you have confirmed the identity of this wire, you can strip it and solder it to the relevant unit lead as specified. Important electrical parts, like ignition coils and injectors, are powered by this wire. Once more, be sure you are using the right wire by checking for power with a test light or multimeter while the key is turned on. Then, as previously mentioned, this wire will be soldered to the corresponding unit wire. Next, you must find the wire connecting the ignition switch to the starter solenoid. It is possible to check this wire only with the key in the cranking position.
  21. When the key is turned with the assistance of another person, a test of this wire should reveal power. After ensuring this wire starts, solder it to the matching wire on the remote starter module.
  22. Since each remote starter kit is unique, some components demand that different wiring connections be made. For more information, refer to your remote starter kit’s instruction booklet.

The wire and module for your unit will now be Zip-tied into place once your remote starter kit is operational. Ensure that these parts are firmly mounted and aren’t in contact with moving parts. To finish your installation, reassemble all of the trim.

How Can you Tell if a Car has Remote Start Without Remote?

  1. Look for a remote start button on the car key fob. Many vehicles with remote start will have a button for this feature on the key fob.
  2. Consult the owner’s manual for the car to see if the remote start feature is available.
  3. If an aftermarket remote start system has been installed in the vehicle, it may be accessed via a separate remote or button.
  4. When the remote start is turned on, the ignition key is not required to start the engine. Without anyone personally starting it, if you hear the engine start, it probably has a remote start.

How Can I Remote Start My Car From My Phone?


A remote start system should be installed in your car first. On some more recent vehicles, this might come as standard equipment, or you might be able to add it as an extra. If you want to make sure that your automobile has this feature, check the owner’s manual or get in touch with the dealer.

You must download and install the manufacturer’s app in order for your car to work with remote starting if it has that feature. FordPass, myChevrolet, and MyHyundai are a few examples of these apps for Ford and Chevrolet and Hyundai vehicles, respectively. Both the App Store and Google Play Store have these apps available.

You must set up an account and register your vehicle with the app after you have installed it. To finish this process, adhere to the directions provided by the program. Your automobile’s Bluetooth or Wi-Fi network should be active on your phone. The app will be able to communicate with the technology in your automobile. Following the above instructions, you can remotely start your car using the app. Open the app, choose remote start, and then adhere to the directions displayed on the screen. Some apps may require a PIN or other security code before you may start your automobile remotely.

VIDEO CREDITS: Berger Chevrolet YouTube Channel

Related Reads: Discover More Content You’ll Love

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *